Powder Section
Coating Pan with Spraying, Peristaltic Pump & Blower, Drying System, The Coating pan machine is used to producing uniform coating on tablets, Pellet coating Vitamins, Food, Candy with the help of Baffles inside of pans. This can be mounting on the universal Systems and as a results different tilting angle can be set up to 45 Degrees. Coating pan rotation, pan speed, pan supply temperature, spray system operation etc depend of products.
- Spraying systems consisting of peristaltic pump, spraying nozzles with stand, pneumatic pipe, air, solution conveying pipe, spraying gun.
SPECIFICATION
Application
SPECIFICATION
| Model No. | SBCP-24″ | SBCP-36″ | SBCP-48″ | SBCP-72″ |
| Loading capacity | 25 Kgs | 60 -80 Kgs | 100-120 Kgs | 200-250 Kgs |
| Drive Motor HP 3 PH 50 C S 415 V AC line | 0.5 HP | 1.00 HP | 2.00 Hp | 7.5 HP |
| RPM of Pan (empty) | 12/24 | 12 / 36 | 10 / 30 | 5 /10 |
| Hot air blower motor HP 3 PH 50 C/S 415 V AC line | 0.50 | 0.50 | 1.00 | 1.00 |
| Blower capacity Maximum CFM | 100 | 200 | 500 | 750 |
| Heater KW | 1.5 Kw | 3 Kw | 4.5 Kw | 6 Kw |
Application
- Pan: SS 316 semi ellipsoidal size pan with a circular mouth for charging & discharging of tablets Pan mounted at an inclination of 45 degrees to the horizontal.
- Drive Assembly: Consists of a suitable 1 HP 3 Phase, 440 V, and 1440-RPM TEFC motor with suitable worm reduction gearbox and cone pulley arrangement to give three-speed output.
- Hot Air Blower: The unit is provided with a hot air blower consisting of suitable HP 3 Phase 440 V, 2880-RPM TEFC electric motor & centrifugal blower with damper delivering required CFM. The air is heated by means of suitable electric heater to give air at 30 to 90 degrees Heater with thermostat control and flexible hose pipe.
- Control Panel: Unit provided with suitable control panel with starters and push button to actuate the drive and for blower The circuits consists of MCCBs, relays and contractors in series Ample overload protection is provided by the MCCB and the relay Wires coming out of the connections are numbered for easy recognition
- Mounting: The motor and gearbox is mounted inside sturdy MS frame and the pan mounted on the Gearing housing fitted in the stand. Blower mounted by the side of the stand or placed in remote location if required.
- Finish: All joints argon Arc welded and all SS Parts polished to suitable finished required of pharmaceutical equipment MS parts painted to smooth finish.
- Options: Available Unit with FLP motors and FLP push button station but non FLP panel to be mounted outside FLP area. b. Steam heating for blower.