Rapid Mixer Granulator designed for mixing powder components and forming granules out of them. RMG Machine equipped with two different type of blenders called Impeller and Chopper. Impeller is bigger size blender perform slow speed mixing whereas Chopper is smaller blade perform fast speed mixing. Chopper uses for blending and granules preparation process. Rapid Mixer Granulator designed to provide superior mixing and reliable granules at reduced production costs with increased output. Improved mixing and closed granule size control resulting higher tableting speeds, better quality and fewer rejections.
RMG Machine form granules by tumbling and whirling motion of particulate. High speed rotation of chopper provide edge while adding mixing ingredients. Machine granulate powder by applying shearing force hence it is also called as high shear mixer. Gs Pharma is one of the leading rapid mixer granulator manufacturers produce laboratory rapid mixer granulator 5 liters to production scale rapid mixer granulator 400 liters.
Rapid Mixer Granulator also known as RMG Machine, High Shear Mixer Granulator, Rapid Mixer Granulator Machine, High Shear Mixer Granulators, Dry Powder mixer granulator, Wet Granulator, Pharma Saizoner, High Shear Granulator, High shear granulation machine, Granulator, Wet Mixing, Granulation Machine.
Model | 10 | 25 | 100 | 150 | 250 | 400 | 600 |
Gross Capacity in Ltrs. | 10 | 25 | 100 | 150 | 250 | 400 | 600 |
Working Capacity in Ltrs. | 8 | 20 | 80 | 120 | 200 | 320 | 480 |
Main Motor – H. P. | 2/3 H.P. | 3/5 H.P. | 7.5/10 H.P. | 10/12.5 H.P. | 22/30 H.P. | 30/40 H.P. | 40/50 H.P. |
Impeller Motor RPM | 75/150 | 75/150 | 75/150 | 75/150 | 100/150 | 100/150 | 100/150 |
Chopper Motor – H. P. | 1/1.5 H.P. | 1/1.5 H.P. | 2/3 H.P. | 3/5 H.P. | 3/5 H.P. | 5/7.5 H.P. | 5/7.5 H.P. |
Chopper Motor RPM | 1500/3000 | 1500/3000 | 1500/3000 | 1500/3000 | 1500/3000 | 1500/3000 | 1500/3000 |
Weight Kgs. Approx. | 425 | 650 | 1400 | 1600 | 2000 | 2500 | 3000 |
Length in mm approx. | 1450 | 1800 | 1900 | 2100 | 2150 | 2750 | 2850 |
Width in mm approx. | 600 | 1200 | 1300 | 1900 | 1900 | 2420 | 2530 |
Height in mm approx. | 950 | 1400 | 1450 | 1500 | 1650 | 1900 | 2070 |
Lid Opening Height in mm approx. | 1060 | 1600 | 2150 | 2300 | 2550 | 2950 | 3250 |
Complete GMP model.
All contact parts made from Stainless Steel 316 with Non contact parts made from Stainless Steel 304.
MS structure is fully covered with Stainless Steel 304 covers/claddings.
All contact parts are mirror polished to 220 Grit and external surfaces to matt finish of 180 Grit.
Homogeneous binder distribution.
Short batch time and reduce cleaning time.
Maximize CIP effectiveness.
Air purge sealing system for main stirrer shaft and granulator shaft.
All internal contact parts are polished to the mirror finish.
A high-speed granulator is inserted horizontally through wall of bowl to assist blending of powder and to break the product to the granules of required size.
The seal housing and drive shaft may be flushed with cleaning water, which is then drained away from the machine through built in drain tubes.
Granulator motor is provided with a removable stainless steel shroud which covers the motor and simplify cleaning.
All moving parts of the machine are totally enclosed to eliminate accident.
The machine can not be started unless and until the mixer cover is properly closed.
Flush wall type discharge valve eliminates pockets at the port of discharge valve